Step by step instructions to make this long sleeveless dress pattern

 Front & Back Dress pattern

Draw a square in to below measurements, For Front and back dress top section
AB / CD- 24 cm
AC / BD - 38cm

BH / AH  -  Mark 2.5 cm and draw a vertical line. This is the shoulder slope.

AE - Neck width 9cm and mark point  E.

AH - Back neck drop 3cm  ,  And draw the neckline as shown in the diagram
AI - Front neck drop 8cm , And draw the neckline as shown in the diagram

IL - 3.5cm 

IJ - 9cm front neck 'V" depth  

HF - Shoulder width 18cm and mark point F. Connect point H & F for the shoulder line. 

FK - Armhole straight 21cm and mark K. 

FK - Draw Front & back armhole curve as shown in the diagram. make sure the front and back armhole scoop difference is 2cm see the diagram and get the armhole center and mark the 2cm difference and more scoop armhole is the front armhole and less scoop armhole curve is the back armhole. draw this accordingly. 

CP  - Waist width - 21cm 

MN  -  bottom hem width 48cm

NO -  11cm Bottom hem curve height 

MO  - Curve the bottom hem line as shown in the diagram  

KPO -  Connect these pints and draw the blouse side seam as shown in the diagram. 

Pocket pattern: 

KU - 30cm Pocket bag start position

UV - Pocket open - 16cm

WU - Pocket bag width 18cm

WX - Pocket bag length 28cm

Draw the pocket bag as shown in the diagram according to the above measurements. 

Draw a Sleeve binding pattern into 45 degree angle widths of 3.2cm and 70cm long.

Make sure to add 1cm seam allowance to all the pattern pieces after you made them. 

*** Make sure to click on the Image for a better view ***

 Step by step instructions to make this long sleeve blouse pattern

Section 01 : 
 Front & Back Blouse pattern

Draw a square in to below measurements, For Front and back top section
AB / CD- 24 cm
AC / BD - 64cm

BM -  Mark 3cm and square up to point N. This is the shoulder slope.

AK - Neck width 11cm and mark point K.4

AN - Back neck drop 4cm  ,  And draw the neckline as shown in the diagram
FO - Front neck drop 8cm , And draw the neckline as shown in the diagram

NL - Shoulder width 18.5cm and marl point L. Connect point K & L for the shoulder line. 

AI / BJ - mark 15cm and square up. 

IQ -  Across front - 16cm

IP -  Across Back - 18cm

LF - Armhole straight 21cm and mark F . 

FE - Square up F point to meet the point E which is the bust level. 

LQF - Draw Front armhole curve as shown in the diagram.

LPF - Draw Front armhole curve as shown in the diagram.  

IG / JH - waist level 23cm

GR - Waist - 22cm 

SD - 1.5 cm

DT - 4cm 

CT - Curve the bottom hem line as shown in the diagram

FRT -  Connect these pints and draw the blouse side seam as shown in the diagram. 

Section 02 : 
Sleeve pattern

AB - 38cm , Draw Horizontal line 

CD - 52 cm Draw Vertical line

CM -  Sleeve crown height 12cm

Connect ACB points to draw the sleeve shape.

Mark below points and draw the sleeve front & back curve shape as shown in the diagram.

 For Back curve:

Point G - Down 1cm

Point H - Up 1cm  

Point I - Up 2cm

 For Front curve:

Point J - Up 2cm

Point K - Up 1cm  

Point L - Down 2cm

  

EF -  Sleeve open 28cm 

Connect AE / BF  of the side seams of the sleeve. 

Make sure to add 1cm seam allowance to all the pattern pieces after you made them. 

*** Make sure to click on the Image for a better view ***